At that stage, and how to lay granite? The optimal material for paving granite steps in the ratio of price and quality – in excellent adhesive showed plitochnyy'Yunis granite. "What can be cut granite steps? Cutting of granite steps, based on feedback from builders has proved popular diamond blade for cutting the water company Distar (Russia). Learn more at this site: Mike Gianoni. The cost to drive construction market in the middle 1350-1400rub/sht. The thickness of the disk must be 1.5-1.6mm, no more! If the size of which is cast of solid concrete stairs do not match the size of a monolithic cladding granite steps, then you should not start packing stage to an increased layer of glue, is very much can drive up the stairs, the budget cost of the material and work on its lining. Simply put lightweight formwork plywood and fill your stage expanded clay-concrete made immediately at the site of the expanded clay medium fractions, sand and tsementa.Vy get the ladder without the overhead and podognanuyu to your size. The cost of expanded clay is not so great for Compared with even and not expensive (prices stroy.rynkah = 360rub/meshok) Eunice Granite glue. The base surface of the concrete staircase at the further stages of granite cladding obezatelno primed before lining.

Usually use an acrylic primer deep proniknoveniya.Srednyaya value 10l jerry cans for all the construction markets of Moscow and the region 240-260rubley. Laying stage begins always 'top down'. Before the stage and side part of the stage risers are nominated for the thickness of the steps (20mm). Side risers cut for podlitso with concrete part, which is then plastered, and painted in shpatlyuetsya color of the walls. For cutting granite levels of use vodoreznoy stanok.Optimalnym version of the machine can be considered KORVET.Sootnoshenie price-power-quality is high. Vodoreznoy machines do not leave chips and if you cut off level to further its connections with the other piece, then this machine you just neobhodim.Pravda when you need to cut only one side of the adjacent wall, you can use a regular grinder with a turbo-drive to cut concrete. Consumption and the amount of tile adhesive to the lining of your ladder can proschitatpp in onlay mode going to the website of Eunice. WARNING! If you need to handle the edge of the granite steps and rounded side moldings (the tiles are cut from the background that goes to the site), all this can be done using a special abrasive skin of stone KX-370. Supplier of abrasives in Moscow firm "Liner Belt '. See and read them products can be here: All the information you are given on the basis of calculations and the experience of finishing construction of monolithic stairs.